Creative Power Technologies
Skip to: Content, Main Navigation, or Section Navigation.

Overview

The CPT-DATS is an interface board designed to provide an easy and flexible development environment for the CPT-DA2810 (TMS320F2810 DSP) controller board.

The CPT-DATS board has a DSP Controller Interface (compatible with the CPT-DA2810) and provides an on-card regulated power supply, non-isolated RS-232 serial communications and 3.3V to TTL level translation interfaces.

Technical Specifications


The CPT-DATS board provides buffering and signal conditioning for digital signals to the DSP Controller Interface. This includes level-shifting of the digital I/O between the DSP Controller Interface 3.3V and the external TTL level (5V). All analog signals are passed directly through to the DSP Controller Interface.

The CPT-DATS board requires a CPT-DA2810, or equivalent, DSP processor card to operate.

On-card facilities include:

  • 16 off buffered complementary TTL-level gate driver PWM outputs
  • common fault interrupt and enable
  • 8 off TTL-level individually configurable digital I/O bits, with common interrupt
  • 7 off TTL-level interrupt and capture port inputs
  • 2 banks of 6 off 12-bit 0-3V ADC inputs
  • 2 off output LEDs
  • 2 off non-isolated RS-232 level serial communications port
  • 12V Power Supply Input
  • On-card voltage regulation
  • 1 off 80 way Connector

Containing:

  • 12 off 12-bit 0-3V ADC inputs
  • 2 off Serial Communications Interfaces
  • 1 off Enhanced Controller Area Network (eCAN)
Dimensions:
    173mm x 86mm (6.81" x 3.39")



Available Peripherals

  • CPT-COM - TTL Level Serial Card to RS-232 / RS-485