Overview
The CPT-DA2810 is a low cost standardised DSP controller board designed to provide a fully flexible interface between the TMS320F2810 DSP processor and a user customised motherboard. The board has been designed to meet different user interface requirements whilst providing a 4 layer DSP core with basic on-board functionality.The board is based around a Texas Instruments TMS320F2810PBK DSP, which has been specifically developed for use in digital motor/motion control applications.
- Technical Brief V1.3
- CPT-DATS
- CPT-COM
- CPT-Mini2810
- CPT-E03
- CPT-E21
- CPT-W03
- CPT-W04
- ...Back...
Technical Specifications
The board is based around a Texas Instruments TMS320F2810PBK DSP, which
has been specifically developed for use in digital motor/motion control
applications.
On-card facilities include:
- TMS320F2810PBK DSP processor
- 64k x 16 Flash (128k x 16 Flash on TMS320F2811PBK)
- 1k x 16 OTP ROM, 4k x 16 Boot ROM
- Serial Flash Memory with 1Mbit of non-volatile storage
- 1 off Power LED
- 2 off indication LEDs
- Reset/Power-On Circuitry
- Power supply to generate all on-card supplies
- Power supply operation from input 5VDC
- The CPT-DA2810 card also supports the following peripheral interfaces:
- JTAG interface
- 1 off clocked Serial Peripheral Interface (also enables external Flash reprogramming)
- 1 off 3.3V-TTL serial interface
- 1 off 80 way Connector
Containing:
- 12 off 12-bit 0-3V ADC inputs
- 2 off Serial Communications Interfaces
- 1 off Enhanced Controller Area Network (eCAN)
- 110mm x 55mm (4.33" x 2.17")
Inclusions:
The CS-DA2810 is supplied with
- Technical Manual
Available Peripherals
- Software Libraries
- CPT-COM - TTL Level Serial Card to RS-232 / RS-485
- CPT-DATS - Development Board
- CPT-Mini2810 - MiniDSP compatible interface board with on-card CPLD
- CPT-E03 - 2.5kVA Boost Converter Board with on-card Power Stage
- CPT-E21 - 500W Buck Converter + Conditioned Analogs
- CPT-W03 - 2.5kVA Boost Converter Board for external Power Stage
- CPT-W04 - 2.5kVA Single Phase Inverter Board