Creative Power Technologies
Skip to: Content, Main Navigation, or Section Navigation.

MT Series IV

Features

  • Floor standing power supply up to 900 kW+
  • 154+ Models: 10 to 4000 Vdc, 24 to 24000 Adc
  • Wide range of input voltage: From 380 Vac to 480 Vac, at 50 Hz and 60 Hz
  • Optically isolated user I/O circuitry standard: No additional isolation circuitry necessary
  • Front panel analog potentiometers: Stepless rotary control
  • RS-232 interface standard with SCPI Commands: GPIB, USB, Ethernet, RS-485 interfaces optional
  • High efficiency operation: up to 92% efficient at full load
  • LXI TCP/IP Ethernet communications: Embedded web-server
  • OVT and OCT shutdown standard: Mechanical contactors to disconnect input mains
  • Certified LabWindows/CVI and LabView Drivers: GPIB, Serial, and TCP/IP
  • High power factor
  • New With D Panel - Photovoltaic Power Profile Emulation software
  • CE Mark with optional EMI Filter CE Mark

Specifications

 

Input
Nominal Voltage
3 phase, 3 wire + ground		 380 VAC (operating range 342 - 418 VAC)
415 VAC (operating range 373 - 456 VAC)
440 VAC (operating range 396 - 484 VAC)
480 VAC (operating range 432 - 528 VAC)
Frequency 50 Hz through 60 Hz
Power Factor Greater than 92% at maximum power
 
Environmental
Operating Temperature 0°C to 50°C
Storage Temperature -25°C to +85°C
Air Cooling Front and rear air intake, top exhaust
 
Physical
Dimensions
(H" x W" x D")		 100 kW: 62.5 x 48 x 31.5 in (158.8 x 121.9 x 80.0 cm)
150 kW: 62.5 x 48 x 31.5 in (158.8 x 121.9 x 80.0 cm)
200 kW: 62.5 x 96 x 31.5 in (158.8 x 243.8 x 80.0 cm)
300 kW: 62.5 x 96 x 31.5 in (158.8 x 243.8 x 80.0 cm)
400 kW: 62.5 x 192 x 31.5 in (158.8 x 487.7 x 80.0 cm)
450 kW: 62.5 x 144 x 31.5 in (158.8 x 365.8 x 80.0 cm)
600 kW: 62.5 x 192 x 31.5 in (158.8 x 487.7 x 80.0 cm)
Weight 100 kW: 1600 lbs (725.8 kg)
150 kW: 2100 lbs (952.5 kg)
200 kW: 3200 lbs (1451.5 kg)
300 kW: 4200 lbs (1905.1 kg)
400 kW: 6400 lbs (2903.0 kg)
450 kW: 6300 lbs (2857.6 kg)
600 kW: 8400 lbs (3810.2 kg)
 
Output
Ripple See Model Charts
Line Regulation Voltage Mode: ± 0.004% of full scale
Current Mode: ± 0.02% of full scale
Load Regulation Voltage Mode: ± 0.01% of full scale
Current Mode: ± 0.04% of full scale
Load Transient Response 2 ms to recover within ±1% of regulated output with a 50% to 100% or 100% to 50% step load change
Efficiency ≥ 86%
Stability ± 0.10% for 8 hrs. after 30 min. warmup
Isolation Maximum input voltage to ground: ±2500 Vac
User inputs and outputs: referenced to Earth ground

For models less than or equal to 1000 Vdc:
Maximum output voltage to ground: ±1000 Vdc

For models greater than 1000 Vdc:
Maximum output voltage to ground: ±4000 Vdc
 
Programming Levels and Accuracy of Full Scale
Voltage
Set Point		 Current
Set Point		 OVT
Set Point		 OCT
Set Point
Remote Analog Programming Accuracy ± 0.50% ± 0.75% ± 0.50% ± 0.75%
Digital Programming Accuracy ± 0.50% ± 0.75% ± 0.50% ± 0.75%
Remote Analog Programming Levels 0 - 10.0 Vdc 0 - 10.0 Vdc 0 - 11.0 Vdc 0 - 11.0 Vdc
 
Monitoring Levels and Accuracy of Full Scale
Output Voltage Output Current
Remote Analog Monitoring Accuracy ± 0.50% ± 0.75%
Digital Monitoring Accuracy ± 0.50% ± 0.75%
Remote Analog Monitoring Levels 0 - 10.0 V 0 - 10.0 V
 
Control Limits
Remote Sense Limits 3% maximum voltage drop from output to load
Period Programming Limits Minimum period: 10 msec
Maximum Period: 9997 sec or 2.77 hours
Digital control inputs and outputs limits Input voltage: 0 to 10 Vdc
Output voltage: 0 to 10 Vdc, 5 mA drive capacity